Stránka 1 z 1

Gibson explorer míry

Napsal: 3.03.2009 19:13
od zdenekvt
Dobrý den, chtěl bych Vás poprosit, ten kdo Má gibsona explorera, jestli by mi ho mohl změřit, myslím míry, délky apod., abych si ho mohl přesně nakreslit+foto ať vím jestli je to typ který chci. Děkuji Odměna možná

Napsal: 3.03.2009 19:16
od Red Bull
Přesunuto do Home made sekce - tam tomu bude lépe.

Napsal: 3.03.2009 19:43
od Farrell
Prevzato z UG fora :) :
Here, I just knocked this up:

Obrázek

The guide lines show the distance each measurement is for. They should be accurate to within ~2mm.

If you need any other measurements, let me know.

Edit: I just checked these against my Explorer, and they're pretty much spot on. If you draw them out, you'll get a pointy outline, then you'll need to round and expand a little to get the perfect shape.

Napsal: 3.03.2009 19:57
od zdenekvt
Farrell píše:Prevzato z UG fora :) :
Here, I just knocked this up:

Obrázek

The guide lines show the distance each measurement is for. They should be accurate to within ~2mm.

If you need any other measurements, let me know.

Edit: I just checked these against my Explorer, and they're pretty much spot on. If you draw them out, you'll get a pointy outline, then you'll need to round and expand a little to get the perfect shape.


Dííííííííííííííííííííííííky moc. Ten výkres mám, ale nemám tam ty kóty

Napsal: 3.03.2009 20:26
od Farrell
Neni zac, stacilo hodit do googlu "gibson explorer blueprints" a plany byly na svete.. :)