Hudební fórum

manual píše:Tuning in Manual mode
1. Electric instruments: Connect the output of your
instrument to the input jack of the tuner.
Acoustic instruments: Use the internal mic.
2. When you turn on the power, the GU40 is automatically
set to MODE=AUTO GUITAR and PITCH=440 Hz.
3. Change the PITCH and FLAT settings if desired.
4. Use the MODE button to select MAN. GUITAR or MAN.
BASS.
Use the FUNCTION button to select NOTE, and use the
buttons to select the note that you want to tune.
5. If the pitch of the string is more than ±50 cents away
from the correct pitch, tune the string until the correct
note name appears in the LCD and one of the tuning
guide LEDs is lit.
When the pitch of the string is within ±50 cents of the
correct pitch, tune the string to make the needle stop
at the "0" position.
6. When the tuner needle stops at "0," the green LED in
the center will light. Tuning is complete.