Pozn.: Měl jsem domluveného Kettnera za slušnou cenu ale prodejce se neozívá. Tudíž musím hledat dál.
Předem dík
Vlasta
crateamps.com píše:The Crate three-button footswitch supplied with the FlexWave65/112 allows access to an
additional DSP preset for each channel of the amplifier. When the footswitch is connected to
the amplifier as shown below, the “original” DSP presets are active for each channel when the
#3 footswitch LED is illuminated. These are referred to as “DSP Bank A.” When the #3 button
is switched and the LED is off, a second DSP preset may be stored and recalled for each
channel — “DSP Bank B.”
Note: DSP Bank B presets are only accessible when the footswich is connected to the amplifier.
When the footswitch is not connected, only DSP Bank A is accessible.
Díky ale ANG neumím, učím se 2 měsíce teprv tento jazyk.Sadam.S píše:Přepíná DSP banky...
crateamps.com píše:The Crate three-button footswitch supplied with the FlexWave65/112 allows access to an
additional DSP preset for each channel of the amplifier. When the footswitch is connected to
the amplifier as shown below, the “original” DSP presets are active for each channel when the
#3 footswitch LED is illuminated. These are referred to as “DSP Bank A.” When the #3 button
is switched and the LED is off, a second DSP preset may be stored and recalled for each
channel — “DSP Bank B.”
Note: DSP Bank B presets are only accessible when the footswich is connected to the amplifier.
When the footswitch is not connected, only DSP Bank A is accessible.